INSTRUCTION MANUAL

1. Take everything out of the box including the plates and unwrap everything.
2. You will need to be in your car to start so go ahead and open your trunk and place everything inside.
3. Locate your car battery, every car is a little bit different so just watch a YouTube video if you can't find yours.
4. Next you will locate the wiring we have provided you with. Locate the wiring where there will be two wires with a small piece exposed at the end of them: one wire will be red and one will be black.
5. You will connect the black wire to the positive charge on your car battery and red wire with the negative charge on your car battery. This can be done with electrical tape.
6. We already provide you with a remote and a receiver and everything you will need so you won’t have to go out of your way to look for and purchase these items.
7. Put license plate in the AussiePlate Cover and attach to car using screws.
8. Connect the receiver box to the extension wires and connect them to the wires coming out of the aussieplate, (we recommend wiring through your trunk handle or just trunk. Try to tuck it in and it will stay discreet and safe).
9. Once you have done all of this you are done, the remote works from all sorts of distance and of course from inside of the car. AussiePlate is controllable when car is off using this manual.

 

 

Car Manual 2: Not recommended

Disclaimer: When using this method when the car is off you'll be unable to see License plate as the Car Power Outlet/smoking port doesn't provide power when car is off, if this is a problem use manual 1.

1. Take everything out of the box including the plates and unwrap everything.
2. You will need to be in your car to start so go ahead and open your trunk and place everything inside.
3. Locate your car power outlet/smoking port (Every car has one)
4. Next you will locate the wiring we have provided you with. 
5. You simply plug the 12V power plug into the car socket.
6. We already provide you with locks and a receiver and everything you will need so you won’t have to go out of your way to look for and purchase these items. 
7. Put license plate in the AussiePlate Cover and attach to car using screws.
8. Connect the receiver box to the extension wires and connect them to the wires coming out of the aussieplate. (we recommend wiring through your trunk handle or just trunk. Try to tuck it in and it will stay discreet and safe)
9. Once you have done all of this you are done, the remote works from all sorts of distance and of course from inside of the car.

 

Motorbike Manual

1. Take everything out of the box including the plate and unwrap everything.
2. Locate your motorbike battery, every bike is a little bit different so just watch a YouTube video if you can't find yours.
3. Next you will locate the wiring we have provided you with. Locate the wiring where there will be two wires with a small piece exposed at the end of them: one wire will be red and one will be black.
4. You will connect the black wire to the positive charge on your bike battery and red wire with the negative charge on your bike battery. This can be done with electrical tape.
5. We already provide you with a remote and a receiver and everything you will need so you won’t have to go out of your way to look for and purchase these items.
6. Put license plate in the AussiePlate Cover and attach to bike using screws.
7. Connect the receiver box to the extension wires and connect them to the wires coming out of the aussieplate. (Make sure wires are hidden discreetly and aren't loose)
8. Once you have done all of this you are done, the remote works from all sorts of distance and of course from inside of the car. AussiePlate is controllable when the bike is off.

 

If you have any problems feel free to contact us :)